Styles

BerryMate® tote Specifications

Special Order Only:    Toll Free: 800-501-2458 | Local: 908-276-8484

  • Dimensions— 18 3/4” x 13 3/8” x 4 ½”
  • Volume Capacity to top of divider—510 cubic inches
  • Weight Capacity—14 lbs.
  • Nesting Ratio 1.95:1
  • Material—Hi Impact Thermoplastic with UV stabilizers and FDA Certs.
  • Reusable—Nestable and stackable.
  • Increased Air Flow slots for quick cooling.
  • Many Colors Available

BerryMate® harvest totes with molded-in dividers are a significant advancement over standard harvest totes that require separately purchased dividers that must be assembled into the tote. The dividers help indicate a full tote (at 510 cubic inches) while harvesting blueberries and other fruit, and they ensure the fresh picked berries will not get crushed when the tote is stacked or nested. To nest a BerryMate® tote for storage or empty return shipment, turn it 180 degrees from the stacking position. There are position aids (small raised bumps) on one lip to simplify nesting without looking at the tote. (For a completely non-nesting BerryMate® tote, please see our styles page.) By molding in dividers, we have eliminated both the additional cost of purchasing separate dividers and the labor cost to install and maintain them. BerryMate® harvest totes are designed with “Cool Flow” air vents consisting of vertical slots and lower non-stacking (long) sides. The vent quantity and positioning allows produce to be cooled quicker than in wooden and standard plastic totes.

BerryMate® harvest totes are produced from the finest FDA approved high impact thermoplastic materials. UV stabilizers are also added to help prevent color fading. BerryMate® containers are washable, mildew resistant and 100% recyclable. BerryMate® is a division of Madan Plastics Inc., headquartered in Cranford, NJ. For over 60 years Madan Plastics has provided quality custom injection molded products to a wide range of industries. For more information, please visit www.madanplastics.com.

BerryMate® tote Specifications

Special Order Only:    Toll Free: 800-501-2458 | Local: 908-276-8484

  • Dimensions— 18 3/4” x 13 3/8” x 4 ½”
  • Volume Capacity to top of divider—510 cubic inches
  • Weight Capacity—14 lbs.
  • Material—Hi Impact Thermoplastic with UV stabilizers and FDA Certs.
  • Reusable—Stackable.
  • Increased Air Flow slots for quick cooling.
  • Many Colors Available

BerryMate® harvest totes with molded-in dividers are a significant advancement over standard harvest totes that require separately purchased dividers that must be assembled into the tote. The dividers help indicate a full tote (at 510 cubic inches) while harvesting blueberries and other fruit, and they ensure the fresh picked berries will not get crushed when the tote is stacked. With the dividers molded in, we have eliminated both the additional cost of purchasing separate dividers and labor cost to install and maintain them. The Non­Nesting BerryMate® tote will not nest and can only be stacked, which ensures that freshly picked berries and fruit will not be bruised or crushed by mistakenly nesting a full tote. There is no orientation required for this style of BerryMate® harvest tote. (For a nesting BerryMate® tote, please see our styles page.)

BerryMate® harvest totes are designed with “Cool Flow” air vents consisting of vertical slots and lower non-stacking (long) sides. The vent quantity and positioning allows produce to be cooled quicker than in wooden and standard plastic totes. BerryMate® harvest totes are produced from the finest FDA approved high impact thermoplastic materials. UV stabilizers are also added to help prevent color fading. BerryMate® containers are washable, mildew resistant and 100% recyclable BerryMate® is a division of Madan Plastics Inc., headquartered in Cranford, NJ. For over 60 years Madan Plastics has provided quality custom injection molded products to a wide range of industries. For more information, please visit www.madanplastics.com.

BerryMate® tote Specifications

Special Order Only:    Toll Free: 800-501-2458 | Local: 908-276-8484

  • Dimensions— 18 3/4” x 13 3/8” x 4 ½”
  • Weight Capacity—14 lbs.
  • Nesting Ratio of Tote Without Dividers—2:1
  • Material—Hi Impact Thermoplastic with UV stabilizers and FDA Certs.
  • Reusable—Nestable and stackable.
  • Increased Air Flow slots for quick cooling.
  • Many Colors Available

Some farmers prefer not to have dividers in their BerryMate® harvest totes, so we also offer BerryMate® totes without dividers. In addition, the Nesting No-Divider BerryMate® tote has the highest nesting ratio at 2:1 of all the BerryMate® models. BerryMate® totes nest by turning them 180 degrees from the stacking position. There are position aids ( small raised bumps) on one lip so they can be nested without looking at the tote. BerryMate® harvest totes are designed with “Cool Flow” air vents consisting of vertical slots and lower non-stacking (long) sides. The vent quantity and positioning allows produce to be cooled quicker than in wooden and standard plastic totes.

BerryMate® harvest lugs are produced from the finest FDA approved high impact thermoplastic materials. UV stabilizers are also added to help prevent color fading. BerryMate® containers are washable, mildew resistant and 100% recyclable BerryMate® is a division of Madan Plastics Inc., headquartered in Cranford, NJ. For over 60 years Madan Plastics has provided quality custom injection molded products to a wide range of industries. For more information, please visit www.madanplastics.com.

BerryMate® tote Specifications

Special Order Only:    Toll Free: 800-501-2458 | Local: 908-276-8484

  • Dimensions— 18 3/4” x 13 3/8” x 4 ½”
  • Weight Capacity—14 lbs.
  • Material—Hi Impact Thermoplastic with UV stabilizers and FDA Certs.
  • Reusable—Stackable.
  • Increased Air Flow slots for quick cooling.
  • Many Colors Available

BerryMate® harvest totes are available without molded-in dividers and with the nonnesting feature ensuring that a full tote will not crush produce by mistakenly nesting. (For a full nesting tote, please see our BerryMate® styles page). The NonNesting BerryMate® tote can only be stacked and cannot nest. There is no orientation required for this style of BerryMate® tote.

BerryMate® harvest totes are designed with “Cool Flow” air vents consisting of vertical slots and lower non-stacking (long) sides. The vent quantity and positioning allows produce to be cooled quicker than in wooden and standard plastic totes. BerryMate® harvest lugs are produced from the finest FDA approved high impact thermoplastic materials. UV stabilizers are also added to help prevent color fading. BerryMate® containers are washable, mildew resistant and 100% recyclable. BerryMate® is a division of Madan Plastics Inc., headquartered in Cranford, NJ. For over 60 years Madan Plastics has provided quality custom injection molded products to a wide range of industries. For more information, please visit www.madanplastics.com.